Part # & Price |
Description |
BPI11040
$37.95
|
Shift Crank Lover Unit for Mercruiser #1 Alpha and Gen 2 76865
Shift Crank for a Mercruiser Sterndrive. It will fit all Models that use a Lower Unit Shift.
Fits on the lower shift shaft then into the shift spool to operate the clutch dog.
This item replaces Merc. OEM: # 76865.
|
|
BPI11050
$1.99
|
Clutch Dog Spring Replaces Force 30893 For 1995-99
Gearcase / Gearcase Components / Other Components /
Clutch Dog Spring
OEM: Force Replaces: Force 30893
For 1995-99 Force 3-cyl, 75-90 Hp | 4-cyl, 120 Hp outboard gearcases.
also crosses with:Sierra: 18-2348
GLM: 11050
Mallory: 9-78135
UPC: 840080402697
|
|
BPI11060
$143.95
|
Clutch Dog Lower Unit for Mercruiser Mercury Mariner 52-85394T
Clutch Dog used on Mercruiser Sterndrives & Mercury/Mariner outboards. Replaces Mercury Marine Quicksilver # 52-85394T
|
|
BPI11110
$329.95
|
Drive Shaft Lower Unit for Mercruiser #1 with Preload Pin 1974-1982 45-51939A1
Vertical Drive Shaft for a Mercruiser # 1 drive. This drive shaft is easily distinguishable because of a preload pin at the top of the shaft. The pin is about .250 in diameter and about .650 long. It will not fit MR Alpha drives. This item replaces Mercury Marine Quicksilver #s 45-41939A1, 45-41939F1.
|
|
BPI11190
$3.99
|
Pinion Nut Replaces Force 35921 | F694188 For 1989-99 Force 3-cyl
Gearcase / Gearcase Components / Pinion Nuts /
Pinion Nut
OEM: Force Replaces: Force 35921 | F694188
For 1989-99 Force 3-cyl, 75-90 Hp outboard driveshafts.
also crosses with:Sierra: 18-3719
GLM: 11190
Mallory: 9-78103
UPC: 840080455037
|
|
BPI11405
$89.95
|
Bearing Carrier Lower Unit for Mercury Mercruiser Lower Unit 818763A10
Bearing Carrier for Mercruiser Sterndrives, & Mercury/Mariner Outboards.
This carrier is a conversion from the older style to the newer design with a Zinc Anode.
It will fit the following Models: Mercury/Mariner V6 3.0L (200 DFI, 225 Carb, 225 & 250 EFI), Mercruiser Models: 1974 & Newer R/MR/Alpha One/Alpha One Gen. II.
|
|
BPI11410
$10.95
|
Bearing Roller for Bearing Carrier Johnson Evinrude Mercury 387247 31-30956
Front Bearing Carrier For OMC and Johnson, Evinrude OEM: 387247 1976-1990 V6 Also fits Mercruiser, Mercury/Mariner Replaces Mercury Quicksilver # 31-30956; Johnson / Evinrude (OMC) # 387247
|
|
BPI11420
$10.99
|
Bearing Replaces Mercury 30895T,30895 For 1983-91 R/MR/Alpha One propshafts
MerCruiser / Gearcase /
Bearing
OEM: Mercury Replaces: Mercury 30895T | 30895
For 1983-91 R/MR/Alpha One propshafts.
also crosses with:Sierra: 18-1157
GLM: 11420
Mallory: 9-75111
UPC: 840080427621
|
|
BPI12670
$8.95
|
Anode Zinc Trim Tab Full Fin for Mercruiser, Mercury, Mariner, Yamaha
Zinc Anode, Trim Tab, Full Fin, Mercruiser, Mercury, Mariner, Yamaha
Used on Mercruiser sterndrives (R, MR, Alpha One) that use an aluminum prop
Yamaha outboards with aluminum props
Replaces Mercury # 31640-4; Yamaha # 41107-ZW1-0032A.
|
|
BPI21110
$10.95
|
Nut Cover for Mercury Mariner Lower Unit 52699
Cover Nut fits Mercury, Mariner Lower Units and 80 series Mercruiser outdrivs. Holds the bearing carrier in lower unit. OEM: 52699
|
|
BPI21620
$21.99
|
Ball Bearing Replaces: Mercury 88957T, 88957, 88957A1, 17927, 35914
MerCruiser / Gearcase /
Ball Bearing
OEM: Mercury Replaces: Mercury 88957T | 88957 | 88957A1 | 17927 | 35914
For 1983-91/1998-2010 R/MR/Alpha One & Alpha Gen II propshafts.
also crosses with:Sierra: 18-1155
GLM: 21620
Mallory: 9-75114
UPC: 840080428789
|
|
BPI28350
$16.95
|
Retainer Bearing Carrier for Mercruiser R MR Alpha One Gen II 816811-1
Bearing Carrier Retainer, Upper Spanner Nut, fits Mercruiser R, MR, Alpha One and Gen. II (GLM90100 wrench fits this part)
|
|
BPI81180
$2.95
|
O-Ring for OMC SX Volvo Penta SX Transom 3852565 BPI81180
O-Ring for OMC/Volvo Penta SX Models OMC # 3852565 Volvo # 3852565-5
|
|
BPI85040
$9.95
|
Oil Seal Powerhead Mercury Mariner 26-16977 BPI85040
Powerhead Oil Seal for Mercury/Mariner Replaces Mercury Quicksilver # 26-16977
|
|
BPI89840
$13.95
|
Impeller Mercruiser #1 R MR Alpha One Mercury Mariner 47-89984T4
Impeller for all Mercruiser I/O 1991 & prior (# 1, R, MR, Alpha One) and Mercury/Mariner outboard 65 HP (4 cyl) and up with short vane impellers. Fits most V6 with plastic water pump housing. Replaces Mercury Marine Quicksilver original equipment part # 47-89984T4; GLM # 89840; Mallory # 9-45306; Sierra # 18-3017 OUTSIDE DIA: 2.375" INSIDE DIA: .875"
|
|
GLM11020
$246.95
|
Reverse Gear for Mercruiser MC-1 and R 43-92320T
Reverse Gear for Mercruiser Sterndrives. It will fit the following application: Mercruiser Sterndrive Models MC-1 & R. This item replaces Mercury Marine Quicksilver # 43-92320T.
|
|
GLM11030
$85.95
|
Shift Spool for Mercruiser Mercury Mariner Lower Unit 818349T1
This Shift Spool Assembly Fits Mercruiser Alpha One, And Alpha One Gen II. It Also Fits Mercury And Mariner Outboard Models 200(DFI), 225 (3.0 Carb), 225 Seapro/Marathon(3.0 Carb), 225/250 (3.0l EFI). Replaces OEM: 818349T1
|
|
GLM11040
$67.95
|
Shift Crank Lover Unit for Mercruiser #1 Alpha and Gen 2 76865
Shift Crank for a Mercruiser Sterndrive. It will fit all Models that use a Lower Unit Shift. Fits on thelower shift shaft then into the shift spool to operate the clutch dog. This item replaces Mercury Marine Quicksilver # 76865.
|
|
GLM11050
$2.95
|
Spring Clutch Dog Pin Retainer for Mercruiser Mercury Mariner 24-30893
Clutch Dog Spring for Mercruiser And for Mercury Mariner Applications. Goes Around the Clutch Dog and Holds The Pin From the Shift Spool In Place. Replaces Mercury Marine Quicksilver # 24-30893
|
|
GLM11060
$179.95
|
Clutch Dog Lower Unit for Mercruiser Mercury Mariner 52-85394T
Clutch Dog used on Mercruiser Sterndrives & Mercury/Mariner outboards. Replaces Mercury Marine Quicksilver # 52-85394T
|
|
GLM11070
$2.95
|
Key Impeller for Mercruiser Mercury Mariner Lower Unit 28-56654
Key for Water Pump on Mercruiser # 1, Alpha One, DRS and Mercury/Mariner Outboard Lower Units Replaces Mercury Marine Quicksilver # 28-56654
|
|
GLM11080
$1.09
|
Key Bearing Carrier for Mercruiser Mercury Mariner Lower Unit 28-30281
Bearing Carrier Key for Mercruiser Sterndrive and Mercury/Mariner Outboard lower units Replaces Mercury Quicksilver # 28-30281
|
|
GLM11100
$359.95
|
Gear Set Forward Pinion for Mercruiser #1 1974-1983 Preload Pin Models
Forward and pinion Gear Set for Mercruiser # 1 and R 1974-1982 for models with a preload pin on the top of the vertical drive shaft.
|
|
GLM11110
$329.95
|
Drive Shaft Lower Unit for Mercruiser #1 with Preload Pin 1974-1982 45-51939A1
Vertical Drive Shaft for a Mercruiser # 1 drive. This drive shaft is easily distinguishable because of a preload pin at the top of the shaft. The pin is about .250 in diameter and about .650 long. It will not fit MR Alpha drives. This item replaces Mercury Marine Quicksilver #s 45-41939A1, 45-41939F1.
|
|
GLM11155
$399.00
|
Shaft Propeller for Mercury 3 and 4 Cylinder and Gen 2 98 Up 44-850308
Fits many Mercury and Mariner 60-125 HP 3 and 4 Cylinder Outboards with Bigfoot Lower Unit 4.25 Inch Torpedo Diameter and a bolt on bearing carrier also this style lower unit has a stainless steel water pump housing. Also fits Mercruiser Alpha Gen 2 1998 and newer Outdrives.
Length 15-1/2 Inches Needle Bearing Diameter 1-3/16 Prop Splines 15
Replaces OEM: 44-850308
|
|
GLM11190
$3.95
|
Nut Pinion for Mercruiser Johnson Evinrude Lower Unit 11-35921
Pinion Drive Shaft Nut, fits: Mercruiser, Mercury, Mariner Replaces Mercury Quicksilver # 11-35921 Johnson, Evinrude
|
|
GLM11380
$5.79
|
Washer Bearing Carrier for Mercury Mariner Mercruiser 14-79447
Lower Unit Tab Washer, Larger, For Mercruiser, and Mercury Replaces Mercury Quicksilver # 14-79447
|
|
GLM11410
$10.95
|
Bearing Roller for Bearing Carrier Johnson Evinrude Mercury 387247 31-30956
Front Bearing Carrier For OMC and Johnson, Evinrude OEM: 387247 1976-1990 V6 Also fits Mercruiser, Mercury/Mariner Replaces Mercury Quicksilver # 31-30956; Johnson / Evinrude (OMC) # 387247
|
|
GLM11420
$15.95
|
Bearing Roller for Mercruiser Mercury Mariner In Forward Gear 31-30895
Roller Bearing for Mercruiser Mercury Mariner. Fits inside the forward gear. Replaces Mercury Quicksilver # 31-30895
|
|
GLM12310
$24.95
|
Water Pump Base for Mercruiser 1974-1982 Units with Preload Pin 46-57234A1
Water Pump Base for Mercruiser Outdrives with preload pin on the vertical drive shaft 1974-1982.
Comes with seal installed
OEM: 46-57234A1
|
|
GLM12410
$32.95
|
Water Pump Housing Upper for Mercruiser Mercury Mariner 46-96148A1
upper water pump housing used on Mercruiser stern drives from 1991 and down. It is also used on Mercury/Mariner outboards, 65 thru 225 hp with the large plastic housing. this item replaces Mercury Marine Quicksilver original equipment part # 46-96148A1.
|
|
GLM12510
$4.59
|
Wear Plate, Mercruiser, Mercury, Mariner
Wear Plate for Raw Water Pump on Mercruiser; also fits water pump on Mercury/Mariner OEM: 32435
|
|
GLM12810
$6.95
|
Water Pump Cup for Mercruiser MC-1 R MR Alpha One Mercury 65-225 HP 48752
Water Pump Cup for Mercruiser Sterndrives: MC-1, R, MR, Alpha One and Mercury Outboards: L4, L6 & V6 (65-225 HP) Replaces Mercury Marine Quicksilver original equipment part # 48752
|
|
GLM12821
$7.95
|
Bolt Water Pump Housing for Mercruiser Mercury Mariner Lower Unit 10-30720
Bolt for Mercruiser water pump in Lower Unit OEM: 10-30720
|
|
GLM12822
$2.09
|
Screw Water Strainer Mercruiser Lower Unit Insert 10-76156
Screw, Insert fastener, Mercruiser Lower Unit. Holds the strainer on the side of Mercury and Mercruiser lower units. OEM: 10-76156
|
|
GLM17000
$729.95
|
Housing Lower Unit for Mercruiser #1 R Models with Preload Pin 1974-1982
Gear Housing for Mercruiser Models with preload pin on vertical drive shaft 1974-1982, replaces # 1 & R Outdrives (upper, lower or complete units) cannot be paid for by Credit Card or by PayPal.
|
|
GLM21010
$20.95
|
Bushing Shift Shaft for Mercuriser Lower Unit 23-30617A2
Shift Shaft Bushing with seal Installed and O-ring. Mercruiser Inboard/Outboard, all except Gen. II. Also included in lower seal kit GLM87510. Special tool needed for this item part number GLM90140. OEM: 23-30617A2
|
|
GLM21030
$48.95
|
Shaft Lower Shift for Mercruiser R MR Alpha One 77481-1
Lower Shift Shaft, 1991 & prior, Mercruiser R, MR, and Alpha One OEM: 77481-1
|
|
GLM21110
$19.95
|
Nut Cover for Mercury Mariner Lower Unit 52699
Cover Nut fits Mercury, Mariner Lower Units and 80 series Mercruiser outdrivs. Holds the bearing carrier in lower unit. OEM: 52699
|
|
GLM21180
$2.95
|
Nut Lock 1/4 Fine Thread for Mercruiser Mercury Mariner OMC
Lock Nut, 1/4" fine Fits Mercruiser R, MR, Alpha One Water Pump Housing in Lower Unit and Mercury/Mariner 40-70 HP, Inline/V6 Merc. # s: 11-35888, 11-13438 Fits Lower Unit on OMC Stringer and Cobra and Transom Mount on Cobra OMC # : 121731
|
|
GLM21190
$3.95
|
Nut Lock 5/16 Fine for Mercruiser Mercury Mariner
Lock Nut, 5/16" fine
Fits Water Pump Housing on Mercruiser R, MR, Alpha One Lower Units and Mercury, Mariner Inline 6, V6
OEM: 11-45592
|
|
GLM21200
$5.95
|
Washer Tab Lock Long for Mercruiser, Mercury, Mariner Propeller Nut
Tab Washer with longer legs for Mercruiser and Mercury Mariner L4 & V6
|
|
GLM21490
$1.95
|
Water Pump Housing Washer for Mercruiser R Mercury Mariner 12-29245
Washer for Water Pump Housing on Mercruiser Rand Mercury/Mariner/Force Gear Housing Replaces Mercury Marine Quicksilver original equipment part # 12-29245
|
|
GLM21570
$29.95
|
Bearing, Upper Drive Shaft, Mercruiser With Preload Pin
Upper Drive Shaft Bearing for Mercruisers with preload pin OEM: 31-53079A1
|
|
GLM21590
$63.95
|
Bearing Tapered Roller for Mercruiser Mercury Mariner Forward Gear 31-35928A1
This is the bearing that is used on the forward gear of Mercruiser models R/MR/Alpha One, some Alpha One Gen II units and Mercury 175-275 HP outboards use it also.
Bearing size is 1.875" I.D. - 3.500 O.D.
Mercury outboards V6 3.0l (200 DFI, 225 Carb, 225, 250 EFI) with a 1.65:1 ratio also use this bearing on the forward gear.
Replaces Mercury # 31-35928a1
|
|
GLM21600
$52.95
|
Bearing, Lower, Driveshaft, Mercruiser with Preload Pin
Roller Bearing for Driveshaft on Mercruiser Models with preload pin OEM:31-92366A1
|
|
GLM21620
$44.95
|
Bearing Ball Lower Unit Reverse Gear Mercruiser Mercury Mariner 31-88957T
Reverse Gear ball Bearing for Mercruiser, Mercury Mariner Lower Unit OEM: 31-88957T
|
|
GLM21720
$1.95
|
Water Pump Washer for Mercruiser Mercury Mariner Force Lower Unit 12-36001
Washer for water pump in Lower Unit for Mercruiser R, MR, Alpha One; Mercury, Mariner Force Inline 6 & V6 105-225 HP Replaces Mercury Marine Quicksilver original equipment part # 12-36001
|
|
GLM21880
$5.95
|
Insert, Port, Mercruiser
Drive Insert for Port side on Mercruiser Drives OEM: 93424-1
|
|
GLM23141
$28.95
|
Thrust Ring, Mercruiser R
Thrust ring for Mercruiser R Lower Unit OEM: 35915
|
|
GLM23220
$18.95
|
Shim, Mercruiser, Mercury, Mariner Lower Unit Drive Shaft Bearing
Shim (1991-95) Mercruiser, Mercury/Mariner, 3.500 OD OEM: 15-47397A1 Contains 1 each: .002, .003, .005, .010, .020
|
|
GLM23300
$8.95
|
Shim Set, Mercury, Mariner, Force V6 150-200 HP Outboard 15-57007A1
Shim Set for Lower Unit Gears on Mercury/Mariner/Force Fits: V6 150 HP Standard Rotation Serial No. 6616991-OA904645 (1985) V6 175 HP Standard Rotation Serial No. 5393737-668750 (1980-81) V6 200 HP Standard Rotation Serial No. 5393737-6073191 (1980-81) All Models with Pre-load Pin in Drive Shaft This Shim Set is also included in GLM11770 Complete Gear Set and GLM11780 Forward & Pinion Gear Set Replaces OEM: 15-57007A1
|
|
GLM28350
$29.95
|
Retainer Bearing Carrier for Mercruiser R MR Alpha One Gen II 816811-1
Bearing Carrier Retainer, Upper Spanner Nut, fits Mercruiser R, MR, Alpha One and Gen. II (GLM90100 wrench fits this part)
|
|
GLM81180
$2.95
|
O-Ring for OMC SX Volvo Penta SX Transom Replaces 3852565
O-Ring for OMC/Volvo Penta SX Models OMC # 3852565 Volvo # 3852565-5
|
|
GLM82260
$2.95
|
O-Ring, Upper Unit, OMC, Volvo SX 3852044
O-Ring for SX Drives OMC# 3852044 Volvo# 3852044-0
|
|
GLM85040
$9.95
|
Oil Seal Powerhead Mercury Mariner Replaces 26-16977
Powerhead Oil Seal for Mercury/Mariner Replaces Mercury Quicksilver # 26-16977
|
|
GLM85700
$11.95
|
Seal Outer Propshaft Mercruiser MC-1 R Alpha One Gen 2 Mercury Mariner V6
Outer Propshaft Seal fits: Mercruiser MC-1, R, Alpha One, Alpha One Gen. II Sterndrives, Mercury/Mariner 6 cyl, 3.0L Outboards Replaces: 26-12224
|
|
MAL9-43502
$5.95
|
Water Pump Cup for Mercruiser MC-1 R MR Alpha One Mercury 65-225 HP 48752
Water Pump Cup for Mercruiser Sterndrives: MC-1, R, MR, Alpha One and Mercury Outboards: L4, L6 & V6 (65-225 HP) Replaces Mercury Marine Quicksilver original equipment part # 48752 Where Ignition Is Just The Start.
|
|
SIE18-3017
$18.95
|
Impeller Mercury Mariner and Mercruiser #1 R MR Alpha One 47-89984T4
Impeller for all Mercruiser I/O 1991 & prior (# 1, R, MR, Alpha One. Also Fits Mercury and Mariner outboard 65 HP 4 cylinder and up with short vane impellers.
Fits most V6 with plastic water pump housing.
Replaces: Mercury # 47-89984T4 GLM # 89840 Mallory # 9-45306 OUTSIDE DIA: 2.375" INSIDE DIA: .875"
|
|
GLM31170
$2.95
|
Gasket, Drain Plug, Mercruiser, Mercury, Mariner, OMC, Volvo SX
Gasket, Drain Plug Replaces: Mercury Quicksilver # 26-8M0058390; OMC # 307552; Mallory #s 9-60408, 9-60101 For Most Models (2 per pack)
|
|
MAL9-72004
$3.95
|
Nut Lock 7/16 Fine Thread Stainless Steel for Mercruiser 11-13439-1
Lock Nut, 7/16" fine For Mercruiser R, MR, Alpha One Upper Unit and Trim Assembly; Bravo Trim Assembly; R Lower Unit; OEM: 11-13439-1 Where Ignition Is Just The Start.
|
|
BPI21731
$8.95
|
Drain Plug, Magnetic, Mercruiser, Mercury, Mariner, OMC, Volvo O
Magnetic Draining Screw Set for all Mercruiser/Mercury/Mariner drives for OMC/Volvo SX drives Replaces: Mercury Quicksilver # 22-67892A1 OMC # 3854539 Volvo Penta # 3854539-8
|
|
GLM21360
$8.95
|
Tab Washer Receiver, Mercruiser, Mercury, Mariner
Tab Washer Receiver Kit for propeller on Mercruiser R, Alpha One Gen. II, Bravo 1 and 2; Mercury/Mariner Inline 6, V6, 3.0L Outboards OEM: 12-31211A3
|
|
MAL9-76108
$9.95
|
Oil Seal Mercruiser Mercury 26-16977
Oil Seal Used in various applications in both Mercruiser Sterndrives and Mercury Outboards. Replaces Mercury Marine Quicksilver original equipment part # 26-16977; GLM # 85040; Sierra 18-2013 Shaft Size:Ãâà0.875" (22.225mm) OD:Ãâà1.250" (31.750mm) Width:Ãâà0.188" (4.775mm)
|
|
SIE18-2191
$95.95
|
Carrier Bearing for Mercruiser #1 and Alpha 1 Lower Units 1974-1990 73020A14
Carrier Bearing for Mercruiser Lower Units 1974-1990.
Includes Roller Bearing and Propshaft Seals Already Installed!
Replaces:
GLM | 11405 | Mallory | 9-72601 | Mercury Marine | 73020A14 |
WARNING: Cancer and Reproductive Harm-https://www.P65Warnings.ca.gov
|
|